How do I reset my D-Link print server to factory defaults?
Step 1: Locate the hole on the back of the print server above the word RESET. Step 2: Using a paper clip, press and hold the Reset button for about 5 seconds and then release. Step 3: After the print...
View ArticleWhy won´t HP Printer work with D-Link Print Server or Router?
If your printer is not mentioned in this FAQ, it may work. If you are using a multi-function printer, only the printing function will work through the D-Link print server. Several kinds of printers are...
View ArticleWhat is the Default password to D-Link DPR-1260 print server and How to reset...
By default, there is no password for the D-Link DPR-1260 print server. If you have forgoten or lost your password for your D-Link print server, the following can be done, you will need a small object...
View ArticleHow to configure MAC Address Control on the D-Link DI-704P Gateway?
MAC Address Control This D-Link DI-704P provides two features in MAC Address Control: Fixed IP Mapping and Connection Control. Both these features are MAC level. You can enable these features by...
View ArticleAbout D-Link DP-300U Print Server Configuration
1. I have a D-Link DP-300U print server. t has 2 LPT ports and 1 USB. I am using 1 LPT and the USB. Windows 7 finds the Print server in Network under Other Devices and even shows it with a name as a...
View ArticleHow to install a printer that is connected to the D-Link DI-824VUP?
Printers connected to the D-link DI-824VUP cannot be configured using the standard Windows TCP/IP port configuration wizard. You must install the PRTmate software that ships with the unit. 1.Software...
View ArticleHow do I manually install my printer using a D-Link print server in Windows...
Step 1 Locate the Queue name, or Port name, of your printer. Step 2 After you locate the Queue or Port name, you will want to write it down. (You can also highlight it with your cursor, and copy the...
View Article
More Pages to Explore .....